YSI Professional Plus Multiparameter Meter
This meter measures a combination of D.O. , temperature, pH, conductivity, salinity, TDS, ORP, ammonium, nitrate, chloride and barometric pressure. The meter also has automatic temperature, salinity and barometric pressure compensation.
This meter allows you to test up to 11 different parameters with one meter and a cable change. This meter has a backlit display and keypad, graphic display with detailed messages and instructions plus a gauge that shows battery level. The rubber over-molded case has an IP67 waterproof rating and is drop rated to one meter. The meter can store 2000 data numbers and has USB capabilities. The meter uses 2 C batteries. D.O range is 0-50 ppm, temperature range is -5 to 100 C, Conductivity range is 0-200 mS/cm, Salinity range is 0-70 ppt, pH is 0-14 units, ISE range is -1,999-1.999 mV, TDS range is 0-100 g/L, Barometer range is 375-825 mmHg.
Quatro cable holds for user replaceable probes.
|
YSI ODO-Optical Dissolved Oxygen Meter
The YSI Professional Series ProODO is the first handheld optical dissolved oxygen meter designed for sampling applications. This meter has a luminescent sensor that requires no flow dependence, making it the perfect meter for applications where stirring is difficult or undesireable. This also reduces the possibility of operator era. The sensor is resistant from fouling by hydrogen sulfide and other gases.
The digital ODO probe stores calibration data so probes can be interchanged between instruments without recalibration. The unit stores 2000 data sets and USB connection allows interaction with the Data Manager software. The unit supports English, Spainish, German, Italian, Norwegian, Portuguese, and French. IP67 rated case. Salinity input rate 0-70 ppt. Runs on 2 C batteries. Dissolved Oxygen range is 0-50 ppm. Temperature range is -5 to 70 C.
|
YSI Pro20 Dissolved Oxygen Meter
| Rugged and reliable, the YSI Pro20 provides
everything you need in a handheld DO/temp instrument for your aquaculture
application. User replaceable probes and cables, Mil-spec connectors, an
IP-67 waterproof rating even without the battery cover, rubber over molded
case and 1-meter drop test ensures the instrument remains in your hands
to provide years of sampling even in the harshest field conditions. Fast
response times allow you to measure your tanks or ponds quickly, saving
time and money. The Pro20 easily and quickly calibrates and measures DO
values. User-replaceable DO sensors and cables will keep the instrument
working if something ever goes wrong with the cable or sensor. The cable
has a two year warranity and the instrument has a 3 year warranity. DO
response times are the fastest on the market, 95% response in 8 seconds.
This unit can be used in the harshest of conditions. The instrument stores
50 data points. Insturment has built in barometer for more accurate readings.
Powered by two C batteries. |
|
| Sensor Type: Polargraphic or galvanic
Range: 0 to 500% air saturation, 0 to 50 mg/L
Accuracy: 0 to 200% air saturation or - 2%
of reading, 0 to 2 mg/L or- 0.2 mg/L of reading
Temperature Range: -5 to 70 degrees Celsius |
|
YSI Pro20 Dissolved Oxygen Meter
| Part# |
Description |
Weight
|
Price |
| 6050020 |
Pro20Handheld |
5 lbs.
|
465.00 |
| 605201 |
1m cable |
3 lbs.
|
225.00 |
| 605204 |
4m cable |
5 lbs.
|
235.00 |
| 6052010 |
10mcable |
8 lbs.
|
285.00 |
| 6052020 |
20mcable |
11 lbs.
|
365.00 |
| 6052030 |
30mcable |
16 lbs.
|
435.00 |
| 60520100 |
100mcable |
29 lbs.
|
698.00 |
| 605202 |
GalvanicSensor |
3 lbs.
|
160.00 |
| 605203 |
PolargraphicSensor |
3 lbs.
|
160.00 |
|
YSI 55 Dissolved Oxygen Meter
The YSI 55 is our most popular meter. It features easy push button calibration, a probe storage chamber and a wide screen that displays oxygen and temperature at the same time. They read in mg/l and percent oxygen and offer built in altitude(0-10000) and salinity compensation (0-40ppt). The large backlit display is easy to read in sunlight or darkness. The 55 runs off of 6AA batteries ,expect an average of 300 hours of use from the batteries. The display has a low battery indicator on it to let you know when the batteries are low.
This Model of the 55 does not have a removable cord and probe they must be sent back to us for repair. The YSI55D has a detachable cable that makes replacing the cord easy to do in the field. The 55 has a 2 year warranty on the meter and a 1 year warranty on the probe cable assembly. Made in the USA. Call for pricing on 3 or more units
| Part # |
Description |
Wt |
Price |
| YSI5512 |
Meter/12ft cable |
4 lbs |
699.00 |
| YSI5525 |
Meter/25ft cable |
4 lbs |
736.00 |
| YSI5550 |
Meter/50ft cable |
6 lbs |
767.00 |
| YSI55 Case |
Carrying Case |
3 lbs |
65.00 |
| YSI5775 |
Membrane Kit |
1lb |
29.00 |
| YSI55D |
Meter only |
2 lbs |
428.00 |
| YSI55D12 |
12' cable |
2 lbs |
327.00 |
| YSI55D25 |
25' cable |
3 lbs |
351.00 |
| YSI55D50 |
50' cable |
4 lbs |
409.00 |
|
YSI 550-A Dissolved Oxygen Meter
Waterproof to 1 meter
2000 hour battery life
Completely waterproof
Rugged field use cable
This meter is extremely field rugged and sets the standard for aquaculture
D.O measurement. It is completely waterproof to 1 meter (IP67 rated), impact
resistant and measures dissolved oxygen to 50 mg/L and 500% saturation.
It features a field replaceable, polargraphic D.O module that is weighted
for quick sinking, easy-to-replace cap membranes, push button calibration
and temperature, salinity (0 to 70ppt) and alltitude to 10000 feet compensation.
The large backlit display shows oxygen and temp at the same time. Temperature
can be changed between F and C. Runs off 4 C batteries. |
|
D.O Range:
0 to 500% air saturation
0 to 50 mg/L
Resolution:
.1% air; .01 mg/L
Accuracy:
2% air; .3 mg/L
Temperature Range:
-5 to 45 degrees C |
YSI 550-A Dissolved Oxygen Meter
Call for pricing on 3 or more units
| Part# |
Description |
Wt |
Price |
| YSI550A12 |
meter/12ft cable |
7lbs |
795.00 |
| YSI550A25 |
meter/25 ft cable |
10lbs |
815.00 |
| YSI550A50 |
meter/50 ftc able |
11lbs |
868.00 |
| YSI550A100 |
meter/100 ft cable |
12lbs |
944.00 |
| YSI5908 |
membrane kit |
.2lbs |
55.00 |
| YSI559 |
replace able probe |
1lb |
179.50 |
| YSI5060 |
carrying case |
3lbs |
100.00 |
| YSI5085 |
hands free harness |
1lb |
25.00 |
|
YSI 85 Multifunction Meter
| The YSI 85 meter measures dissolved oxygen,
conductivity, salinity and temperature. The meter features a combination
dissolved oxygen/conductivity probe. They are also offered in detachable
models.
The digital display is backlit and simultaneously shows temperature
with a choice of dissolved oxygen, conductivity and salinity. The 85’s
internal memory is capable of storing 50 sets of data and automatic function
check verifies meter is working correctly. The 85 is equipped with automatic
temperature and salinity compensation for D.O
readings. The 85 runs for 180 hours on 6 AA batteries.
The meter has a 2 year warranity and probe and cable 1 year. |
|
D.O Range:
0-20 mg/L
0-200% air saturation
+2% accuracy
Conductivity Range:
0-499.9uS/cm
0-4999uS/cm
0-49.99mS/cm
0-200mS/cm
Salinity Range
0-80ppt
Temperature Range
-5 to 65 C
Response Time
90% in 10 seconds
95% in 15 seconds |
YSI 85 Multifunction Meter
Call for pricing of 3 unites or more
| Part# |
Description |
Wt |
Price |
| YSI8510 |
meter/10 ft cable |
4lbs |
1,295.00 |
| YSI8525 |
meter/25 ft cable |
4lbs |
1,310.00 |
| YSI8550 |
meter/50 ft cable |
6lbs |
1,361.00; |
| YSI85100 |
meter/100 ft cable |
10lbs |
1,461.00 |
| YSI8510D |
10 ft cable |
1lb |
497.00 |
| YSI8525D |
25 ft cable |
2lbs |
540.00 |
| YSI8550D |
50 ft cable |
3lbs |
556.00 |
| YSI85D100 |
100 ft cable |
7lbs |
648.00 |
| YSI85D |
meter only |
3lbs |
809.00 |
| YSI5906 |
membrane kit |
1lb |
45.00 |
|
YSI 52 Dissolved Oxygen Meter
| The YSI 52 is a digital meter that displays
both D.O and temperature readings at the same time. The 52 has a RS232
port so that 70 readings can be downloaded to a computer. The oxygen range
is 0-19.99 mg/Lwith an accuracy of +.02 mg/L and manually adjusted salinity
correction.The 52 will run for a 100 hours on 6 D batteries. Probe and
cable are not included in the price. |
|
D.O Range
0-20 mg/L
0-200% air saturation
+2% accuracy
Conductivity Range
0-499.9uS/cm
0-4999uS/cm
0-49.99mS/cm
0-200mS/cm
Salinity Range
0-80ppt
Temperature Range
-5 to 65 C
Response Time
90% in 10 seconds
95% in 15 seconds |
YSI 52 Dissolved Oxygen Meter
| Part# |
Description |
Wt |
Price |
| YSI52 |
52 meter |
5lbs |
1,410.00 |
|
YSI 58 Dissolved Oxygen Meter
The YSI 58 is a digital meter that features percent saturation and .01 mg/L readability, manual salinity correction, a recorder output, BOD circuitry and 115V or 220V power adapter. D.O accuracy is .03 mg/L and temperature range is -5 to 45C 4 D batteries will run the unit for 100 hours.
Probe and cable are not included in the price.
YSI 58 Dissolved Oxygen Meter
| Part# |
Description |
Wt |
Price |
| YSI58 |
58 meter |
5 lbs |
1,695.00 |
| YSI574010 |
10 ft cable |
1 lb |
242.00 |
| YSI574025 |
25 ft cable |
2 lb |
215.00 |
| YSI574050 |
50 ft cable |
4 lbs |
245.00 |
| YSI5740100 |
100 ft cable |
8 lbs |
321.00 |
| YSI5739 |
probe |
1 lb |
284.00 |
| YSI5718 |
probe/12 ft cable |
2 lbs |
331.00 |
| YSI5775 |
membrane kit |
1 lb |
22.00 |
| YSI5793 |
1501 mil mem |
1 lb |
65.00 |
| YSI5794 |
150.5 mil mem |
1 lb |
65.00 |
| YSI5905 |
BOD probe |
2lbs |
638.00 |
| YSI5906 |
BOD membrane |
1 lb |
42.00 |
|
YSI DO 200 meter
| The DO200 is an economical DO meter for light
use. The rugged housing is IP65 splash resistant.The large display shows
oxygen and temperature readings at the same time. The easy to replace membrane
caps require less stirring. Nine volt battery life is usually 450 hours,
indicator shows when battery is low. The meter has a detachable cable probe
assembly.
Meter has one year warranity and 6 month warranity on probe cable assembly. |
|
Range
0-20 mg/L
0-200% sat
-5 to 45C
Resolution
.1 mg/L
.1% sat
.1 C
Accuracy
.2%
.2%
.3C
|
YSI DO200
| Part# |
Description |
Wt |
Price |
| YSIDO200 |
DO 200 meter |
2 lbs |
228.00 |
| YSI2004 |
4 m cable |
2 lbs |
247.00 |
| YSI20010 |
10 m cable |
4 lbs |
280.00 |
| YSI5908 |
membrane kit |
1 lb |
45.00 |
| YSI200BOD |
BOD Probe |
2 lbs |
648.00 |
|
YSI 63 pH/Conductivity Meter
The YSI 63 is a pH and conductivity meter. It is ideal for field and lab use and has internal memory to store up to 50 readings. The meter features a large backlit display that is easy to see under any conditions. Ranges are pH 0-14, Temperature -5 to 75 C, Conductivity 0-4999uS/cm and Salinity 0- 80ppt.
| Part# |
Description |
Wt |
Price |
| YSI6310 |
meter 10 ft cable |
4 lbs |
1130.00 |
| YSI6325 |
meter 25 ft cable |
5 lbs |
1205.00 |
| YSI6350 |
meter 50 ft cable |
6 lbs |
1275.00 |
| YSI63100 |
meter 100 ft cable |
8 lbs |
1375.00 |
|
YSI pH100
The YSI pH100 measures pH and temperature quickly and accurately. The meter will read orp but requires a seperate probe. The electrode offset recognition function displays electrode efficency and tells you when it is time to replace the electrode. Features include internal buffer recognition, auto/manual temperature compensation, large display that displays pH or mV and temperature at the same time. The meter has 2 point calibration and runs on 9 volt batteries.
YSI pH100
| Part# |
Description |
Wt |
Price |
| YSI1000 |
Meter |
2 lbs |
214.00 |
| YSI1001 |
3 ft cable |
2 lbs |
99.00 |
| YSI1004 |
12 ft cable |
4 lbs |
125.00 |
| YSI1101 |
pH electrode |
1 lb |
50.00 |
| YSI1201 |
Temp probe |
2 lbs |
39.00 |
| YSI1251 |
ORP electrode |
2 lbs |
62.00 |
| YSI1111 |
Double junc. probe |
2 lbs |
98.00 |
| YSI1122 |
flatglass probe |
2 lbs |
98.00 |
|
YSI 30 Salinity/Conductivity/Temperature
The YSI 30 is suited for both field and lab use. The large backlit display makes reading numbers easy under any conditions. It is waterproof and floats if dropped in the water. The display shows temperature in C along with temperature compensated conductivity (micro-ohms) and salinity in ppt. Accuracy is .5percent conductivity, .1ppt salinity and .1 C temperature.
Calibration is done with the push of a button. Meter runs 100 hours on 6 AA batteries.The meter has a 2 year warranity and 1 year warranity on probe.
YSI 30 Salinity/Conductivity/Temperature
| Part# |
Description |
Wt |
Price |
| YSI3010 |
meter 10 ft cable |
4 lbs |
690.00 |
| YSI3025 |
meter 25 ft cable |
5 lbs |
725.00 |
| YSI3050 |
meter 50 ft cable |
6 lbs |
760.00 |
| YSI3167 |
1000 s/cm 1pt |
2 lbs |
18.00 |
| YSI3168 |
10000 s/cm1pt |
2 lbs |
18.00 |
| YSI3169 |
50000 s/cm 1pt |
2 lbs |
18.00 |
|
YSI 556 Multiprobe System
Rugged and reliable, this multiprobe system
combines the versitility of an easy to use handheld unit with functionality
of a multi parameter system. Featuring an IP67 waterproof case, the YSI
556 MPS simultainesouly measures dissolved oxygen, pH, salinity, conductivity,
temperature and ORP. The 556 offers 1,2 or 3 point pH calibration.
The meter is powered by four C batteries or an optional rechargeable
battery pack with fast charge feature. An optional internal barometer can
be user calibrated and displayed along with other data. The 556 comes standard
with a soft sided carrying case that has enough space for the meter, a
20 meter cable and calibration supplies. |
|
Field-replaceable D.O, pH and ORP probes
Compatable with Ecowatch for Windows software.
Internal memory has 35 file names and stores over 49000 setpoints
Three-year warranity on meter, one year on probe
|
| Part# |
Description |
Wt |
Price |
| YSI5561 |
556 meter |
4 lbs |
1625.00 |
| YSI5562 |
556 meter/bar |
4 lbs |
1799.00 |
| YSI55634 |
4 meter cable |
5 lbs |
940.00 |
| YSI556310 |
10 meter cable |
7 lbs |
990.00 |
| YSI556320 |
20 meter cable |
10 lbs |
1120.00 |
| YSI5564 |
pH kit |
1 lb |
197.00 |
| YSI5565 |
pH / ORP kit |
1 lb |
300.00 |
| YSI6118 |
Recharge battery |
1 lb |
320.00 |
| YSI5083 |
Flow cell |
1 lb |
342.00 |
| YSI5908 |
Membrane kit |
1 lb |
42.00 |
|
YSI pH/Temp Pen
This pH meter features one hand operation, 50 set memory and low cost. Measures 0
to 14 with an accuracy of .02. The pen has a IP67 waterproof housing, ATC,
auto-buffer recognition with 1,2 or 3 point calibration and a replaceable electrode.
| Part# |
Description |
Wt |
Price |
| YSIPH10 |
pH pen |
.3 lb |
92.00 |
| YSIPH11 |
repl.electrode |
.1 lb |
45.00 |
| YSIPH12 |
batteries |
.1 lb |
4.00 |
| YSIPH13 |
case |
.2 lb |
22.00 |
|
YSI ORP/Temp Pen
Take absolute and relative ORP readings from - 1200 to 1200 mV with this affordable waterproof instruiment. Use Zobel ORP calibration solution to recalibrate at any time. The pen has a replaceable electrode, ATC and auto-shut off. Use the 50 set memory and hold feature that locks readings to the screen.The pen has a IP67 housing and easy to use menus.
| Part# |
Description |
Wt |
Price |
| YSIORP15 |
ORP Pen |
.3 lbs |
141.00 |
| ysiorp16 |
repl.electrode |
.1 lbs |
65.00 |
|
